6061 · 6063 · 7075
Aluminium
Typical fit
Housings, brackets, manifolds, consumer hardware
Machining note
Fast to machine, stable at low wall thickness and compatible with clear, colour and hard anodising.
Materials
Choose the grade before we choose the toolpath.
The same geometry can quote very differently in 6061, 7075, 316L or titanium. Specify the exact grade, temper and finish; if you are not sure, tell us the service environment.
Material guide
Five families we routinely review.
Availability and final grade are confirmed at quotation. This is a machining guide, not a stock list.
303 · 304 · 316L · 17-4PH
Stainless Steel
Typical fit
Shafts, flanges, valve parts, corrosion-resistant hardware
Machining note
Grade affects tool life, passivation and price. Call out condition and heat treatment where it matters.
H59 · H62 · C3604 · copper by review
Brass & Copper
Typical fit
Threaded sleeves, electrical parts, fittings and decorative hardware
Machining note
Good chip control for threads and fine features. Alloy and lead-content requirements must be stated.
Grade 2 · Grade 5 by review
Titanium
Typical fit
Lightweight fasteners, bicycle hardware and demanding components
Machining note
Low thermal conductivity changes toolpath and cycle time. Send final tolerance and finish requirements.
POM · PA · PEEK by review
Engineering Plastics
Typical fit
Insulators, guides, wear parts and lightweight prototypes
Machining note
Plastic moves with heat and moisture. Critical fits need the service environment and conditioning stated.
Surface finishing
The finish is part of the drawing.
We coordinate anodising, hard anodising, passivation, plating, polishing, blasting and laser marking. Cosmetic colour needs a sample or a written acceptance range.
See finishing capabilitySend the drawing. We quote within 24 hours.
STEP, DWG, DXF, PDF or a photo with dimensions. Tell us the material, the annual quantity and the finish, and the quote comes back with the process route and the tolerance we will hold.